Rear Bulkhead Installation

A bulkhead is inserted at the rear of the cabin to separate it from the galley (or in "lubberly" terms, the kitchen).

 It looks like I forgot to get a picture of the bulkhead before the hatch stiffener (which will be covered in the following post) was installed.  Anyway, this is a shot of the bulkhead from the rear, inside what will become the galley.  The area between the stiffener and bulkhead will have to be filleted after the hatch is cut out of the shell (more about that later also).

Shooting down at the bulkhead (remember, the shell is upside down right now).  What will be the galley is to the left--cabin to the right.  I was able to add the fillet all the way around from the cabin side.